How long does a roof restoration last?

How long does a roof restoration last?

Roof restoration involves thoroughly cleaning the roof with a high-pressure spray to remove algae, mould, mildew, moss, and grime. It also involves repairing the damaged roof or components, including cracked and broken tiles, replacing metal sheets, rebidding, and repointing. Roof restoration is an excellent way to fix leaks. 

Although the lifespan of roof restoration depends on the quality of the work, the average life is between 10 and 15 years. The roof coating remains on the ridge capping and tiles after 15 years and only requires repointing. Remember, your roof will function properly when the coating remains on the tiles. 

However, when the glaze erodes, the underneath coating will oxidise and become chalky. Therefore, hiring a professional roofer to remove the oxidised coating is essential. At the same time, removing dirt, dust, and grit from the surface is also important to ensure the roof restoration lasts for at least ten years. 

Moreover, after ten years, you may notice the mortar breaks down and cause cracks in the roof. Bear in mind that this is one of the most significant problems that lead to leaks and other complications. So, if you put off repointing, you may need rebidding of your ridge capping. Various factors determine the lifespan of a roof restoration, such as: 


If you want to make your roof restoration project long-lasting, make sure you perform regular cleaning and bi-annual or annual maintenance. Cleaning the roof involves removing the dirt, dust, debris, and peeling paint. 

If you notice any damage on the tile surface, it will interfere with the adhesion of the roof and cause the paint to lift or peel. Hiring a professional roof maintenance service is essential. The professional uses different tools, including a water blaster, to clean the roof. Likewise, a whirl-away tool is vital for cleaning roof tiles. 

Product Application

Using the right product application is directly proportional to long-lasting roof restoration. A professional roofer considers various elements when applying the product. These include the gun’s angle, tip size, and the amount of product applied. These factors determine the longevity of the roof restoration. 

You have not applied the product correctly if you experience warranty issues. Not using the product to the roof adequately can void the manufacturer’s warranty. That’s why we recommend hiring a professional roofing contractor to ensure the roof restoration lasts for a long time without voiding the warranty. 

Quality Products

Using low-quality products can quickly deteriorate the condition of your roof. Even if you perform regular maintenance, your roof restoration won’t last for a long time due to low-quality products. 

So, this results in quickly fading paint, lifting or peeling of paint, broken ridge capping, and other complications. Although you can save money on using cheaper products, it will cost you more in the long run. 

Therefore, we recommend using high-quality products and tools when performing roof restoration to ensure the durability and longevity of your roof. Make sure you hire a professional roof restoration company or service to achieve your goals. 




Roof repairs brighton


Continue Reading

How much does a new roof cost?

How much does a new roof cost?

Roof replacement is an important home improvement project that increases your house value. Not only does roof replacement enhance the structure and function of your house, but it also prevents the risk of leaks, damages, and other costly problems. 

In addition, roof replacement maintains insurance coverage, streamlines your home’s energy efficiency, protects the air quality, upgrades the roof quality, and gets your home a little makeover. 

The cost of roof replacement depends on various factors, such as the configuration, size, materials of the roof. In today’s article, we will discuss the cost of a roof replacement project in Australia. Read on! 

The Cost of a New Roof

Many factors determine the cost of a roof replacement project. However, the general price for a three-bedroom house in Australia is between AUD 6,000 and AUD 1,000 for replacing metal roofing with colorbond. 

Likewise, the average cost of replacing an asbestos roof with a colorbond is between AUD 15,000 and AUD 20,000. Replacing a tiled roof with a colorbond requires you to pay between AUD 20,000 and AUD 25,000, depending on the size, configuration, and contractor’s expertise. 

Because every roof is different, it is crucial to get quotes from contractors to know the exact cost of a new roof replacement. A skillion is the cheapest roof to replace because it requires low maintenance and streamlined repairs. 

On the other hand, some roof replacements cost more. So, it is crucial to determine the type of roof you want to replace, such as a hip roof with hips at the end of gables, a gable roof with an inverted “V” shape, a mansard roof, dormer roof with extra windows, or a gambrel roof. 

Cost of Roofing Materials

Roof replacement cost also depends on the type of material you choose for the project. The most common roof materials are colorbond, asphalt or concrete tiles, slate tiles, and terracotta tiles. 

The cost of colorbond roof replacement is between AUD 18 and AUD 37 per square metre. Asphalt and concrete tiles cost is between AUD 40 and AUD 60 per square metre. If you want to replace the roof with terracotta tiles, expect to pay an average of AUD 80 to AUD 120 per metre square.

However, it also depends on the roof pitch and other factors. Moreover, the average cost of slate tiles is between AUD 200 and AUD 250 per metre square. If you want to install a premium slate, expect to pay between AUD 500 and AUD 600 per metre square. 

In addition to materials and labour, the cost of roof replacement also includes removing the old roof, sending the old roof to the tip, working on the structural framework, and installing insulation and gutters. 

If you have a 2,000 square foot roof, the replacement cost for a colorbond is between AUD 3,300 and AUD 6,900, on average. Similarly, the average price of concrete tiles for a 2,000 square foot roof is between AUD 7,400 and AUD 11,150. 

Furthermore, tiles replacement costs are between AUD 14,800 and AUD 22,300, on average. The average price of slate is between AUD 37,200 and AUD 92,900. It is crucial to get quotes from different contractors and choose the one that aligns with your budget. 




roof repairs brighton


Continue Reading

How much does it cost to repair a roof?

How much does it cost to repair a roof?

Performing a thorough roof inspection is an integral part of the maintenance process, allowing you to identify damages in the exterior/interior areas, roof perimeters, penetrations, drainage, and joints. The purpose is to maintain your roof’s structure, function, and safety. 

Proper roof maintenance keeps the roof in good shape and enables you to identify smaller problems and fix them quickly. That way, you can prevent minor issues from turning into bigger problems. 

The cost of roof repair in Australia varies from company to company. Some contractors charge per square metre while others have hourly rates. The average hourly rate is between AUD 40 and AUD 90 per hour. 

Experts recommend that a roof repair per square metre gives you a more accurate estimate. A roof per square metre is between AUD 15 and AUD 35. Various other factors determine the cost of repair. 

These include the type of roof material that requires repairing, the material quality, access to the roof, the roof’s complexity or pitch, the roofer’s expertise or years of experience, and the type of repair, such as roof leaking repair or repointing. Read on! 

What is the cost of repair by size? 

The general rule of thumb is that a larger roof costs more than a smaller roof. If you have a large roof, make sure you hire a contractor that charges per square metre. The purpose is to save money and get the job done adequately. 

The average cost of a roof repair per 100 to 150 metre square is between AUD 3,000 and AUD 4,700. Likewise, if your roof is 150 to 200 metres square, expect to pay between AUD 4,700 and 6,300. 

A 200 to 250 metre square roof has an average repair cost between AUD 6,300 and AUD 9,400. The 250 to 300 metre square roof repair cost is between AUD 9,400 and AUD 12,500. Perform thorough research and get estimations from different contractors to choose the best fit for your budget. 

What is the cost of repair by service? 

If the roof has undergone minor damage, it will cost less. On the other hand, significant damage will cost you more. So, the repair cost also depends on the extent of the damage—for instance, minor repair costs between AUD 1,000 and AUD 1,200. 

Likewise, if you want to replace gutters, expect to pay an average amount of AUD 1,200. Replacing roof tiles has an average cost between AUD 1,300 and AUD 1,400. Ridge caps repair costs between AUD 2,000 and AUD 2,200, depending on the company you hire. Moreover, mortar replacement will cost you between AUD 2,500 and AUD 2,700 or more. 

What is the cost of repair by material? 

The roof repair cost also depends on the material used for fixing the damaged roof. For instance, if you have a tile roof, the average repair cost per tile is between AUD 35 and AUD 55. 

In contrast, the cost of a colorbond roof sheet is between AUD 13 and AUD 37 per sheet. In addition, the price of corrugated roofing iron is between AUD 50 and AUD 70 per metre square. 




roof repairs brighton


Continue Reading

How much does roof restoration cost

How much does roof restoration cost

Roof restoration is a large project that requires the roofer to clean, repair, and repaint the roof. The primary objective of roof restoration is to prolong its overall lifespan and maintain its structure and function. Roof restoration is relatively inexpensive than the replacement project. 

Research shows that a roof experiences various damages, resulting from higher moisture levels, cracks, holes, punctures, loosen or broken shingles, ponding water, and structural irregularities that occur over time. You can repair your roof to fix minor problems. However, if the damages are irreparable, it is better to restore your roof. 

Keep in mind that roof restoration is not a do-it-yourself (DIY) project because it requires careful planning, preparation, safety measurements, and the skills of a professional roofing contractor. Depending on your roof type, the restoration project may involve tiles or sheets replacement, roof realignment, resealing, repainting, or repointing. Read on! 

Cost of Roof Restoration 

The cost of roof restoration varies from company to company. The restoration project will cost relatively less if you have a small roof. Remember, the cost per square metre is an excellent option for homeowners with larger roofs because this allows them to save money. 

The average cost for a small roof is between AUD 28 and AUD 38 per square metre. Likewise, it is AUD 22 and AUD 28 for a medium-sized roof and AUD 17 to AUD 22 for a large roof. Various factors affect the cost of roof restoration. Let us discuss these elements. 

Factors Affecting the Cost of Roof Restoration 

The most common factors affecting the roof restoration project are the type of material being used for the replacement, the roof system’s materials, the time of completion, labour, and the number of roof penetrations. 

Many people replace their roofs due to the problems caused by algae and mould growth. Remember, roof replacement can cost a lot of money, especially if you are on a budget. The good news is that you can perform roof restoration to restore your tiled, shingled, or metal roof, making it appear new and increasing your home’s resale value. 

The amount of money you can save depends on numerous factors, such as the contractor’s hourly or per square metre charges, the amount of work required, and completion time. Make sure you get and compare quotes from different contractors. The purpose is to choose a company that offers quality services at affordable prices. 

The average cost of roof cleaning is between AUD 250 and AUD 500. Likewise, if you want to carry out a spot repair project, expect to pay between AUD 200 and AUD 500. Remember, this primarily depends on the size of the problem. 

Moreover, the cost of metal roof repairs is between AUD 48 and AUD 58 per square metre. If you have a tiled roof and want to restore it by just performing repairs, the contractor will charge you an average of AUD 55 to AUD 65 per square metre. 

On the other hand, complete roof restoration costs are between AUD 2,500 and AUD 3,000 for an average-sized home. Lastly, the average cost of roof restoration of a tiled roof is between AUD 4,500 and AUD 11,000 for a large roof. 




Roof repairs brighton


Continue Reading

How to calculate roof pitch in degrees

How to calculate roof pitch in degrees

Calculating the roof pitch in degrees is a step-by-step process. A pitched roof has slopes running downward. It usually has two parts at an angle from the central ridge. Sometimes, the roof pitched has one part running from one edge to another.

The roof’s pitch is vertical rise divided by the horizontal space. Calculating the roof pitch allows you to measure its steepness. Many houses in Australia feature a roof where the two rafters fit symmetrically and meet at the top.

The area is known as the ridge or apex. Pitched roofs come in different sizes and shapes, from simple and small structures to complex and grandiose ones. If you have worked in the construction sector, you would probably know how to calculate the roof’s pitch. 

However, if you don’t know how to calculate the roof’s pitch in degrees, then this article is for you. The calculation is essential when you want to replace the roof covering. Likewise, it becomes crucial when installing a brand new roof window. Here is how you can perform the calculations. Read on!

Calculating Roof Pitch in Degrees 

There are numerous ways to calculate or measure the roof’s pitch. You will need a few tools to get the job done, such as the measuring tape, spirit level, and calculator. Access the loft space to take measurements using these tools. 

The process starts with measuring the run of your roof, which is the horizontal length spanning between the wall and peak of your roof. Use a tape measure or spirit level to perform the task adequately. 

The next step is to determine the rise, which is the apex’s height above the wall structure. Once you have measured the run and rise, it is time to divide the rise by the run. The purpose is to achieve the roof’s tangent. The formula for this is:

Tangent = Rise / Run

Once you have calculated the tangent, divide 1.0 by tangent using your calculator. Moreover, multiply the result by 180/pie to get the final value. The formula for calculating the roof’s pitch is: 

Roof Pitch = (1 / Tangent (Rise / Run)) x 180/pie

Final Words 

The pitch of your roof offers a wide range of benefits, including the prevention of water from pooling on the roof’s surface and reducing the risk of leaks. Besides, it allows for additional space in your home, depending on the roof pitch. For example, a high-pitched roof creates a lot of room for your attic. 

Calculating the roof pitch is not easy if you don’t know how to take the measurements and perform calculations using the mathematical formula. Although there are several ways to calculate the roof’s pitch, this article gives you a simple method to measure the roof’s pitch in degrees. Follow the method above to achieve your goals, such as determining the feasibility of extensions or replacing tiles professionally. 




roof repairs brighton


Continue Reading

How to clean solar panels on the roof

How to clean solar panels on the roof

Dirt, dust, and debris accumulated on the solar panels can prevent light from entering the solar cells, leading to reduced energy production. That’s why it is crucial to clean solar panels installed on your roof. 

The process requires removing bird droppings, leaves, dust, dirt, and other environmental pollutants. Research shows that clean solar panels perform efficiently and produce 130% more energy than dirty panels with accumulated debris. Here are a few effective methods to clean solar panels on your roof. Read on! 

Use Water and Soap 

Using this method requires equipment and tools like a hose, bucket, and long, soft brush with no abrasions. Mix a small amount of cleaning agent or detergent into a bucket of water. Start the process by hosing down the modules on the solar panels with water. Use the brush to scrub the solar modules with a mixture of soap and water. 

Make sure you don’t scrub the panels too rough to prevent damages. At the same time, avoid using the brush on the panels’ edges. After coating the panels with soapy water, use the hose again to rinse the panels with water. Remember, you must keep the water pressure low because high pressure can damage the modules. 

Use Vinegar for Cleaning 

Vinegar is an excellent natural cleaner used for various products and items. You will need ¼ cup of vinegar, a small amount of cleaning agent, powdered detergent or liquid, water, hose, and a soft brush. You can also use a sponge or soft cloth. 

Mix all the cleaning materials thoroughly to create a good cleaning solution. Hose the solar panels with water gently. Next, spread the cleaning solution or spray it over the solar panels once the modules are hosed. 

Now, scrub the modules gently and thoroughly to remove the dirt, dust, and grime. Vinegar contains acidic content, eliminating all forms of dirt and dust, making it an excellent cleaning agent. 

Once you have removed the gunk, use the hose to spray the solar modules. Make sure you spray a mild jet of water to prevent damages. Let the panels dry for at least 30 to 40 minutes before connecting them to power. 

Hire a Professional

If you don’t know how to clean the solar panels on your roof repairs brighton, you can hire a professional to get the job done adequately. Although this will cost you some money, hiring a professional is entirely worth it to prevent damages to your solar panels. 

Experts have the right tools and equipment to clean your solar panels on the roof without damaging them. The purpose is to ensure thorough cleaning and efficient performance of the solar panels, leading to increased energy production. 

Final Words 

Dirt, dust, birds’ poops, pollen, and other environmental pollutants can affect the performance of your solar panels and reduce their energy production efficiency. Cleaning solar panels on your roof can make a massive difference. We recommend preventative maintenance to prevent minor problems from turning into bigger issues. Until Next Time! 





Continue Reading

How to clean tile roof

How to clean a tile roof

The Australian climate is conducive to algae, mould, mildew, and moss growth on different structures made of glass, wood, siding, and roofing with concrete tiles. These environmental pathogens make the tile roof appear dirty. 

Research shows that moss, algae, mould, and mildew do not grow directly on the tile. These pathogens grow on the accumulated dirt and other organic materials present on the tile. Increased heat, light, and moisture levels create a favorable environment for pathogens’ growth. 

When these pathogens form and grow on your tile roof, it is crucial to seek a roof cleaning service to remove them from the surface of your tile. Experts recommend avoiding the use of alkaline solutions, strong acids, and oxidizers to prevent damages. Today’s article will give you a list of different methods you can use to clean your tile roof. Read on! 

How to Clean Tile Roof? 

Homeowners and commercial property owners use different methods to pressure clean the roof surface to remove dirt, dust, algae, mould, and mildew. Choosing the right approach is essential, and it depends on whether your tile roof is colour-thru or slurry-coated. In some applications, the cleaning staff adjusts the pressure to 1,200 psi. 

If you use a pressure cleaner, make sure the nozzle’s tip is two feet away from the tile. The limited distance and pressure from the tile prevent damage to the roof’s surface. We recommend hiring a skilled professional with years of experience to get the job done adequately. Here are a few methods to clean your tile roof repairs brighton. Keep reading! 

Pressure Cleaning 

Pressure cleaning is the most widely used method for tiled roofs in Australia. Modern pressure cleaners have induction systems that deliver a 10% solution of water and chlorine. The purpose is to remove the algae, moss, and mildew efficiently and quickly. Make sure you use the recommended pressure or hire a professional to avoid damages. 

Use Alkyd Primer

Coating the roof tile after pressure cleaning is an excellent way to improve its condition and prevent damages in the future. We recommend priming the roof with a clear alkyd primer. Make sure you follow the manufacturer’s instructions for application and curing. That way, you can prevent damages and get the job done efficiently and quickly. 


Painting allows you to change the colour of your roof. If you want to paint your tile roof, make sure you use high-quality and 100% pure acrylic paint. Before starting the process, clean and prime the surface and allow it to dry. A professional painting contractor can help you save time and money by completing the project quickly and efficiently. 

Final Words

Environmental variables like your house location, direction to the sun, trees’ quantity, lakes and canals in the area, and harsh weather conditions lead to the growth of pathogens like mould, mildew, algae, and moss on your tile roof. 

These pathogens can create problems for homeowners, meaning if you fail to remove them on time, they will damage your roof. Sometimes, the roof is irreparable, and you have to replace it. Remember, this can break the bank if you are on a budget. 

That’s why you must hire a professional contractor to clean your tile roof. That way, you can improve its structure and function and increase your home’s resale value. Follow the tips and tricks given above to achieve your goals.




Continue Reading

How to paint a tiled roof

How to paint a tiled roof

Roof tiles are manufactured from cement or clay. However, cement tiles are more commonly used for roofing. Research shows that roof tiles made of cement are highly vulnerable to carbonation, a reaction that occurs in the atmosphere, leading to the formation of carbonic acid. 

Although carbonic is a weak acid, it extracts the cement from the tiles’ surface and creates a friable and fragile layer. The situation worsens over time and damages the roof tiles. While clay tiles do not undergo this issue, they are highly porous with deteriorated paint film curing. Here is how you can paint a tiled roof repairs brighton. Read on! 

Prepare the Surface 

Surface preparation is the first essential step in carrying out the painting project. Without preparing the surface, you can’t paint the tiled roof adequately. The primary objective of surface preparation is to ensure a durable surface bond before applying paint. 

So, start the process by washing the surface using water. Make sure you use a quality brush to remove loosely bound sand particles, dirt, and dust because these pollutants do not adhere to paint coatings. You can also use a high-pressure water jet for thorough cleaning. 

Use clean water to rinse the roof and leave it for some time to dry out. Besides, use a moisture metre to measure the moisture content and ensure it is below 15% on the scale. Next, you need to check the adhesion of the existing paint using adhesive tape. 

For example, you can use masking tape on the dry surface to check the adhesion. Pull the tape off the roof surface and check its underside. Consider the following factors to determine whether the surface is ready for the application of paint. 

  • The surface is ready for painting if there is no coating of paint on the tape 
  • Apply a quality bonding if you see the surface has a powdery layer 
  • Rewash the surface if you see there are leftover sand particles or dust 
  • Strip the surface if you notice the paint coating has come off and repeat the cleaning process 

Apply the Paint 

Once you have prepared the surface, it is time to apply the paint using wool or synthetic roller, brush, or airless spray. We recommend the application of two coats to achieve a high-quality and durable finish. Ensure the first coat is allowed to cure and dry before applying the second coat. 

Avoid applying paint if the weather conditions are not favourable. If you are painting the tiled roof in summer, we recommend starting the process at 8:00 AM. On the other hand, you can start applying the paint at 10:00 AM during the winter to ensure the roof is not cold or damp.

Moreover, use high-quality and 100% pure acrylic paint to achieve a protective and long-lasting finish for fibre cement and concrete roof tiles. Acrylic paint is durable and excellent weather-resistant properties. Hire a professional contractor to complete the project efficiently and quickly. 




Continue Reading

How to remove lichen from colorbond roof

How to remove lichen from colorbond roof

Colorbond roofs are durable materials coated with steel to withstand harsh weather conditions. The average lifespan of a colorbond roof is between 50 and 70 years, making it the most durable, flexible, reliable, and long-lasting metal roof repairs

Lichens grow in warm conditions with high moisture levels. Your roof may block water, but it becomes a favourable habitat for lichen and moss over time. The primary cause of lichens growth on the roof is inadequate drainage. 

Fungus and algae that reproduce with each other cause lichens on the colorbond roof. Research shows that fungus and algae can also end up on the roof from nearby trees, wind debris, and dropped materials. How to remove lichen from the colorbond roof? Here are different ways to get the job done adequately. Read on! 

Use Plain Water 

Using plain water is one of the simplest and easiest ways to remove lichens from the colorbond roof. The process requires you to wash away growing lichen using water. Although it is an easy method, it may not work from intense lichen growth or accumulation on the roof. 

You can use pressure washers to reduce the intensity of lichen on your colorbond roof. However, we recommend hiring a professional roofer because they have the right tools and adjust the pressure to prevent roof damage. 

Use Detergent and Bleach 

When you can’t remove lichens from the colorbond roof using plain water, we recommend using detergent and bleach to eliminate lichens effectively. It is a simple and effective method to get rid of environmental pathogens, including lichens, algae, and fungus. 

The method involves mixing 3/4th cups of lichen in one water gallon. Make sure you stir these ingredients thoroughly. Use a sprayer to apply the mixture to areas on the colorbond roof with increased lichen growth. 

When applying the mixture, make sure you let it on the lichens for 15-20 minutes. Next, remove the leaves and use plain water to wash the roof. Add some detergent in plain water and use a sponge to scrub the roof. 

We recommend focusing on areas where lichens grow more. Wash the roof using plain water after you have scrubbed it thoroughly. You will see that the lichens have long gone. If this method does not work, hire a professional roofer to get the job done efficiently. 

Use a Chemical Cleaner 

There are different brands of chemical cleaners available on the market. Make sure you choose the one designed and made for lichen removal on the colorbond roof. Chemical cleaners are more effective than homemade remedies because they fight the moss and lichen and eliminate them immediately without damaging the roof. 

We recommend purchasing a cleanser made with alkyl dimethyl, benzyl ammonium chloride, or Octyl dimethyl ammonium chloride to achieve your goals and maintain your colorbond roof’s condition. Hire a professional and skilled roofer to ensure everything goes smoothly. That way, you can prevent lichen growth for up to five years. 




Continue Reading

How to remove roof tiles

How to remove roof tiles

Although roof tiles are durable and long-lasting with 40-50 years of lifespan, sometimes, they require replacement. The primary purpose of roof tiles is to protect the inner side of the roof. However, roof tiles require removal and replacement with new ones when problems occur. 

High winds, severe snow, fallen debris, and other environmental factors can damage roof tiles. Likewise, delaying the removal of broken or cracked tiles can worsen the problem and lead to irreparable damages. 

Although removing a roof tile is not a daunting task, it can pose safety risks because you have to work at height. That’s why it is essential to wear safety gear or hire a professional roofer to get the job done efficiently, safely, and quickly. 

Removing Roof Tiles 

Expert roofers argue that it is challenging to nail a broken or slipped tile back into position due to hidden fixing nails behind the tile’s bottom edge. That’s why it is crucial to remove the tile adequately and install the new one securely using a clip, also known as a tingle. Here is the step-by-step process to remove and replace roof tiles. Keep reading! 

Step 1: 

The first step is to remove the cracked or broken tile, requiring you to slide the tile downward. Make sure you slide it down gently to prevent further complications. The purpose is to avoid disturbing the overlapping tiles. 

Besides, use pliers to remove the old nails from the batten. Use a bolster or cold chisel to cut them off flush if you find it challenging. That way, you can streamline the tile removal process. 

Step 2:

The second step is attaching the clip to the batten between the gaps in the two slates. Use a galvanised nail of 25mm from the end to fix it into the batten. That way, the short side will run horizontally and the long-edge vertically down. 

Next, slide the new tile into the position correctly to ensure it sits on the new clip. Make sure you flip the clip’s bottom end over the tile to complete the repair adequately without any problems.  

Step 3: 

If you have non-nailed roof tiles, they are easy to remove because these tiles are not nailed to the battens of your roof. Instead, nibs hold these tiles firm. These nibs protrude from the top edge. 

We recommend tilting the tiles upward above the broken one to achieve enough space to free the broken tiles’ remnants from the batten. You can use a small wedge underneath the tile to hold it in place. That way, you can slide the tile in the position below to achieve accurate replacement. 

Step 4: 

The last step requires you to hook the nibs over the timber batten securely. Once done, you can ease the tile above back to its original position. However, the nibs must stay hooked over the batten. Next, remove the wedges from the tiles. 



Roof repairs


Continue Reading